Skip to main content
Version: 0.10

Troubleshooting

This section contains commands and tips to troubleshoot Fleet.

How Do I...​

Fetch the log from fleet-controller?​

In the local management cluster where the fleet-controller is deployed, run the following command with your specific fleet-controller pod name filled in:

$ kubectl logs -l app=fleet-controller -n cattle-fleet-system

Fetch the log from the fleet-agent?​

Go to each downstream cluster and run the following command for the local cluster with your specific fleet-agent pod name filled in:

# Downstream cluster
$ kubectl logs -l app=fleet-agent -n cattle-fleet-system
# Local cluster
$ kubectl logs -l app=fleet-agent -n cattle-local-fleet-system

Fetch detailed error logs from GitRepos and Bundles?​

Normally, errors should appear in the Rancher UI. However, if there is not enough information displayed about the error there, you can research further by trying one or more of the following as needed:

  • For more information about the bundle, click on bundle, and the YAML mode will be enabled.
  • For more information about the GitRepo, click on GitRepo, then click on View Yaml in the upper right of the screen. After viewing the YAML, check status.conditions; a detailed error message should be displayed here.
  • Check the fleet-controller for synching errors.
  • Check the fleet-agent log in the downstream cluster if you encounter issues when deploying the bundle.

Fetch detailed status from GitRepos and Bundles?​

For debugging and bug reports the raw JSON of the resources status fields is most useful. This can be accessed in the Rancher UI, or through kubectl:

kubectl get bundle -n fleet-local fleet-agent-local -o=jsonpath={.status}
kubectl get gitrepo -n fleet-default gitrepo-name -o=jsonpath={.status}

Check a chart rendering error in Kustomize?​

Check the fleet-controller logs and the fleet-agent logs.

Check errors about watching or checking out the GitRepo, or about the downloaded Helm repo in fleet.yaml?​

Check the gitjob-controller logs using the following command with your specific gitjob pod name filled in:

$ kubectl logs -f $gitjob-pod-name -n cattle-fleet-system

Note that there are two containers inside the pod: the step-git-source container that clones the git repo, and the fleet container that applies bundles based on the git repo.

The pods will usually have images named rancher/tekton-utils with the gitRepo name as a prefix. Check the logs for these Kubernetes job pods in the local management cluster as follows, filling in your specific gitRepoName pod name and namespace:

$ kubectl logs -f $gitRepoName-pod-name -n namespace

Check the status of the fleet-controller?​

You can check the status of the fleet-controller pods by running the commands below:

kubectl -n cattle-fleet-system logs -l app=fleet-controller
kubectl -n cattle-fleet-system get pods -l app=fleet-controller
NAME                                READY   STATUS    RESTARTS   AGE
fleet-controller-64f49d756b-n57wq   1/1     Running   0          3m21s

Enable debug logging for fleet-controller and fleet-agent?​

Available in Rancher v2.6.3 (Fleet v0.3.8), the ability to enable debug logging has been added.

  • Go to the Dashboard, then click on the local cluster in the left navigation menu
  • Select Apps & Marketplace, then Installed Apps from the dropdown
  • From there, you will upgrade the Fleet chart with the value debug=true. You can also set debugLevel=5 if desired.

Additional Solutions for Other Fleet Issues​

Naming conventions for CRDs​

  1. For CRD terms like clusters and gitrepos, you must reference the full CRD name. For example, the cluster CRD's complete name is cluster.fleet.cattle.io, and the gitrepo CRD's complete name is gitrepo.fleet.cattle.io.

  2. Bundles, which are created from the GitRepo, follow the pattern $gitrepoName-$path in the same workspace/namespace where the GitRepo was created. Note that $path is the path directory in the git repository that contains the bundle (fleet.yaml).

  3. BundleDeployments, which are created from the bundle, follow the pattern $bundleName-$clusterName in the namespace clusters-$workspace-$cluster-$generateHash. Note that $clusterName is the cluster to which the bundle will be deployed.

HTTP secrets in Github​

When testing Fleet with private git repositories, you will notice that HTTP secrets are no longer supported in Github. To work around this issue, follow these steps:

  1. Create a personal access token in Github.
  2. In Rancher, create an HTTP secret with your Github username.
  3. Use your token as the secret.

Fleet fails with bad response code: 403​

If your GitJob returns the error below, the problem may be that Fleet cannot access the Helm repo you specified in your fleet.yaml:

time="2021-11-04T09:21:24Z" level=fatal msg="bad response code: 403"

Perform the following steps to assess:

  • Check that your repo is accessible from your dev machine, and that you can download the Helm chart successfully
  • Check that your credentials for the git repo are valid

Helm chart repo: certificate signed by unknown authority​

If your GitJob returns the error below, you may have added the wrong certificate chain:

time="2021-11-11T05:55:08Z" level=fatal msg="Get \"https://helm.intra/virtual-helm/index.yaml\": x509: certificate signed by unknown authority"

Please verify your certificate with the following command:

context=playground-local
kubectl get secret -n fleet-default helm-repo -o jsonpath="{['data']['cacerts']}" --context $context | base64 -d | openssl x509 -text -noout
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            7a:1e:df:79:5f:b0:e0:be:49:de:11:5e:d9:9c:a9:71
        Signature Algorithm: sha512WithRSAEncryption
        Issuer: C = CH, O = MY COMPANY, CN = NOP Root CA G3
...

Fleet deployment stuck in modified state​

When you deploy bundles to Fleet, some of the components are modified, and this causes the "modified" flag in the Fleet environment.

To ignore the modified flag for the differences between the Helm install generated by fleet.yaml and the resource in your cluster, add a diff.comparePatches to the fleet.yaml for your Deployment, as shown in this example:

defaultNamespace: <namespace name>
helm:
  releaseName: <release name>
  repo: <repo name>
  chart: <chart name>
diff:
  comparePatches:
  - apiVersion: apps/v1
    kind: Deployment
    operations:
    - {"op":"remove", "path":"/spec/template/spec/hostNetwork"}
    - {"op":"remove", "path":"/spec/template/spec/nodeSelector"}
    jsonPointers: # jsonPointers allows to ignore diffs at certain json path
    - "/spec/template/spec/priorityClassName"
    - "/spec/template/spec/tolerations"

To determine which operations should be removed, observe the logs from fleet-agent on the target cluster. You should see entries similar to the following:

level=error msg="bundle monitoring-monitoring: deployment.apps monitoring/monitoring-monitoring-kube-state-metrics modified {\"spec\":{\"template\":{\"spec\":{\"hostNetwork\":false}}}}"

Based on the above log, you can add the following entry to remove the operation:

{"op":"remove", "path":"/spec/template/spec/hostNetwork"}

GitRepo or Bundle stuck in modified state​

Modified means that there is a mismatch between the actual state and the desired state, the source of truth, which lives in the git repository.

  1. Check the bundle diffs documentation for more information.

  2. You can also force update the gitrepo to perform a manual resync. Select GitRepo on the left navigation bar, then select Force Update.

Bundle has a Horizontal Pod Autoscaler (HPA) in modified state​

For bundles with an HPA, the expected state is Modified, as the bundle contains fields that differ from the state of the Bundle at deployment - usually ReplicaSet.

You must define a patch in the fleet.yaml to ignore this field according to GitRepo or Bundle stuck in modified state.

Here is an example of such a patch for the deployment nginx in namespace default:

diff:
  comparePatches:
  - apiVersion: apps/v1
    kind: Deployment
    name: nginx
    namespace: default
    operations:
    - {"op": "remove", "path": "/spec/replicas"}

What if the cluster is unavailable, or is in a WaitCheckIn state?​

You will need to re-import and restart the registration process: Select Cluster on the left navigation bar, then select Force Update

caution

WaitCheckIn status for Rancher v2.5: The cluster will show in WaitCheckIn status because the fleet-controller is attempting to communicate with Fleet using the Rancher service IP. However, Fleet must communicate directly with Rancher via the Kubernetes service DNS using service discovery, not through the proxy. For more, see the Rancher docs.

GitRepo complains with gzip: invalid header​

When you see an error like the one below ...

Error opening a gzip reader for /tmp/getter154967024/archive: gzip: invalid header

... the content of the helm chart is incorrect. Manually download the chart to your local machine and check the content.

Agent is no longer registered​

You can force a redeployment of an agent for a given cluster by setting redeployAgentGeneration.

kubectl patch clusters.fleet.cattle.io -n fleet-local local --type=json -p '[{"op": "add", "path": "/spec/redeployAgentGeneration", "value": -1}]'

Migrate the local cluster to the Fleet default cluster workspace?​

Users can create new workspaces and move clusters across workspaces. It's currently not possible to move the local cluster from fleet-local to another workspace.

Bundle failed to deploy: "resource already exists" Error​

If your bundle encounters the following error message during deployment:

not installed: rendered manifests contain a resource that already
exists. Unable to continue with install: ClusterRole "grafana-clusterrole"
in namespace "" exists and cannot be imported into the current release: invalid
ownership metadata; annotation validation error: key "meta.helm.sh/release-namespace"
must equal "ns-2": current value is "ns-1"

This error occurs because a Helm resource with the same releaseName already exists in the cluster. To resolve this issue, you need to change the releaseName of the resource you want to create to avoid the conflict.